Is 6.6 kW a Level 2 EV Charger?

Infographic confirming 6.6 kW is a standard Level 2 EV charger running on a 240V supply.

Yes. A 6.6 kW charger is a Level 2 EV charger. It runs on a 240-volt AC circuit and draws about 27.5 amps. Level 2 covers a wide range of power levels, from about 3.3 kW up to 19.2 kW, so 6.6 kW sits comfortably in the middle. It’s also one of the most common onboard charger ratings in electric cars.

Why 6.6 kW Counts as Level 2

Charging levels are defined by voltage and type of current, not by one fixed power number:

  • Level 1: 120-volt AC, up to about 1.9 kW. Usually a standard household outlet.
  • Level 2: 240-volt AC, up to 80 amps or 19.2 kW.
  • DC fast charging: high-power DC charging, typically 50 kW and above.

A 6.6 kW charger uses 240-volt AC power, so it belongs in Level 2. The math is simple: 6,600 watts ÷ 240 volts = 27.5 amps.

Two Different Things Called “6.6 kW”

This is where most of the confusion comes from. The number can describe two separate pieces of equipment:

  1. The charger (EVSE), which is the wall unit or portable cable that supplies power.
  2. Your car’s onboard charger, which converts AC power into battery power inside the vehicle.

Your charging speed is limited by whichever is lower. A 6.6 kW onboard charger is common on many electric cars, including some Nissan Leaf models and older Fiat 500e models. Check your car’s specs to confirm yours. If your car’s onboard charger is 6.6 kW, a stronger home charger won’t make it charge any faster. The car simply draws what it can handle.

How Fast Is 6.6 kW Charging?

A 6.6 kW connection adds about 6.6 kWh of energy to the battery each hour. For most EVs, that’s roughly 20 to 25 miles of range per hour.

Approximate charging times from near empty to full, including some charging loss:

Battery size Approximate time at 6.6 kW
40 kWh 6–7 hours
60 kWh 9–10 hours
75 kWh 11–13 hours

That’s plenty for overnight charging at home. Compare that with Level 1, which can take well over a day for a large battery.

What Does a 6.6 kW Charger Need at Home?

  • Voltage: 240 volts
  • Current: about 27.5 amps
  • Breaker: EV charging is a continuous load, so the circuit is sized at 125%. 27.5 × 1.25 is about 34.4 amps, which rounds up to a 40-amp breaker.
  • Wire: usually 8 AWG copper on a 40-amp circuit, but have a licensed electrician confirm for your setup.

A common 32-amp home charger (about 7.7 kW) also works on a 40-amp circuit. Your 6.6 kW car will simply draw what it can. Read our guide on how many amps you need for a Level 2 EV charger for more.

Should You Buy a 6.6 kW Charger or a Bigger One?

  • If your car has a 6.6 kW onboard charger: a 32-amp charger is plenty. Anything bigger won’t speed up charging today.
  • If you might buy a different EV later: a 40-amp or 48-amp charger gives you room to grow, but it needs a bigger circuit and costs more to install.
  • If you want the lowest install cost: a charger sized for your current car usually costs less, since the wiring and breaker can be smaller.

See what to expect in our guide to how much it costs to install an EV charger, and read is installing a Level 2 EV charger worth it? if you’re still deciding.

What About Outside North America?

The “Level 1, 2, 3” labels are mostly used in North America. In other places, chargers are usually described by kilowatts and phase, such as 7 kW single-phase or 22 kW three-phase. On a typical 230-volt supply, 6.6 kW is about 28.7 amps. It’s still the same kind of AC charging, just labeled differently.

Frequently Asked Questions

Is 6.6 kW a Level 2 charger?
Yes. Anything on a 240-volt AC circuit up to 19.2 kW is Level 2.

How many amps is 6.6 kW?
About 27.5 amps at 240 volts, or roughly 28.7 amps at 230 volts.

Is 6.6 kW fast charging?
It’s much faster than Level 1 but slower than DC fast charging. It adds roughly 20 to 25 miles of range per hour.

How long does it take to charge an EV at 6.6 kW?
About 6 to 7 hours for a 40 kWh battery and 9 to 10 hours for a 60 kWh battery, from near empty.

What breaker size do I need for a 6.6 kW EV charger?
A 40-amp breaker, since EV charging is a continuous load sized at 125%.

Can I use a higher-power charger with a 6.6 kW onboard charger?
Yes. The car will only draw up to its 6.6 kW limit, so it will be safe but no faster.

Is 6.6 kW the same as 7 kW?
Almost. Both are Level 2 AC charging. A 7.2 kW charger is 30 amps at 240 volts, so the difference in speed is small.

Final Takeaway

A 6.6 kW charger is a Level 2 charger, running on 240-volt AC at about 27.5 amps. Your car’s onboard charger decides how much of that power it can actually use, so check it before you buy equipment.

Planning a home charger? Contact us with your questions, or browse our Level 2 charging articles and charging types guides.

Disclaimer: Always confirm your vehicle’s onboard charger rating and have a licensed electrician size the circuit. Wiring rules vary by location.

Leave a Reply

Your email address will not be published. Required fields are marked *